Need metal parts ? Contact Taihe.

Product Description Technical information Engineering difficulty

Deep drawing part used in military

1. Material: Aluminum
2. Surface treatment: Sand spraying and anodizing
3. Process: Stamping and punching --- Progressive deep drawing for 8 times ---- Sand spraying and anodizing

Material thickness is only 0.5mm,diameter is only 12 mm,but depth is 80mm, very easy to break in deep drawing processes.

Deep drawn part used in 3D printer

1. Material: Stainless steel
2. Surface treatment: Sand spraying and laser etching
3. Process: Stamping and punching --- deep drawing --- punching holes --- Sand spraying --- Laser etching logo

1. 3mm SUS, with 3/4 hardness, hard material, difficult to fabricate;
2. The base have more than 600 holes, edge between holes are small, combine above reason, it's easy to generate burrs, so we deburr by tooling.

Deep drawn stamping used in Kitchen

1. Material:
Stainless steel / Aluminum
2. Surface treatment:
Electropolishing / Anodizing
3. Process:
Stamping --- deep drawing --- Reshaping --- Stud bolt --- Welding ---Polishing / Anodizing

1. Food safe material;
2. Nice and bright surface, without any burrs.

Deep drawn stamping used in Kitchen

1. Material:
Stainless steel / Aluminum
2. Surface treatment:
Electropolishing / Anodizing
3. Process:
Stamping --- deep drawing --- Reshaping --- Stud bolt --- Welding ---Polishing / Anodizing

1. Food safe material;
2. Nice and bright surface, without any burrs.

Deep drawing metal shells

1. Material:
Stainless steel
2. Surface treatment:
Electropolishing and Spinning brushing
3. Process: Stamping --- Deep drawing --- Heat treatment--- Reshaping --- Punching holes

1. Diameter is different between bottom and up side.
2. Punching holes on round surface.
3. Food safe material and surface treatment;

Stainless steel deep drawing used for Kettle

1. Material:
Stainless steel
2. Surface treatment:
Electropolishing and Spinning brushing
3. Process: Stamping --- Deep drawing --- Heat treatment--- Reshaping --- Welding with handle

1. Food safe material and surface treatment;
2. Deep depth;
3. Nice and bright surface;
4. Strongly assembled with the handle.

Deep drawing weldind used in Hydraulic Control Valves

1. Material:
Stainless steel
2. Surface treatment:
Polishing
3. Process:
Stamping --- deep drawing --- Reshaping --- Stud bolt --- Welding ---Polishing

1. Welding the two semicircles together, but welding mark should be invisible;
2. Shape should be totally round after welded together.

Deep drawn stampings used in water meter

1. Material:
Stainless steel
2. Surface treatment:
Demagnetization and Electropolishing
3. Process:
Stamping --- Deep drawing --- Reshaping --- Demagnetization ---Electropolishing

1. Several shallow steps;
2. Emboss surface on steps;
3. Demagnetizes for the steel material.

Scroll to Top